The Best Ink and Adhesive Remover for the Flexographic Printing Industry. It is a mixture of Environmentally Sensible organic solvents, wetting agents and a corrosion inhibitor. It replaces Acetone, MEK, Methylene Chloride, and caustic based cleaners. Due to its low vapor pressure and high boiling point it evaporates 237 times slower than Acetone and MEK; 600 times slower than Methylene Chloride. This means, whatever quantity you purchase, you will use.
Ink Blaster | FG ™ is Biodegradable, non-toxic, non-corrosive, residue free, Low VOC, non-flammable, no ODCs, non-HAPs, No SARA Title 313 Reporting. It offers high ink and adhesive loading and can be used for an extended period of time. It is recyclable via vacuum distillation, resulting in reduced disposal costs.
INK BLASTER | FG ™ Ink & Adhesive Remover effectively removes
- Cured & Un-cured Inks
- Oil & Solvent-based inks
- UV-cured inks
- Adhesives, Varnishes
- Cured & un cured Inks
- Oil & Solvent based inks
- UV cured inks
- Adhesives, Varnishes
From
- Anilox, Rubber, Ceramic & Urethane Rolls
- Flexographic press equipment (doctor blades filters, lockup holders)
- Fittings, connectors, Ink pans, transfer pails & drums
Environmental
Does NOT Contain Raw Materials on the following lists
- State of California (Prop 65) to cause cancer, birth defects or other reproductive harm
- Section 112(b) of Hazardous Air Pollutants (HAPs)
- REACH Annex
- SARA Title 313
- Does Not contain Ozon Depleting Chemicals
- NJ Community Right to Know Environmental Hazardous Substance (EHS) List
- Section 112(b) of Hazardous Air Pollutants (HAPs)
- REPLACES solvents such as Acetone, MEK, Methylene Chloride, and caustic based cleaners
Features & Benefits
¶ Low VOC
¶ High ink & resin loading – can be used for an extended period
¶ Non-corrosive
¶ Recyclable via vacuum distillation- resulting in reduced disposal costs
¶ Residue free – No Rinsing required
¶ Due to its low vapor pressure and high boiling point – it evaporates 237 times slower than Acetone and MEK; 600 times slower than Methylene Chloride. Therefore, whatever quantity you purchase, you will use and not loose to evaporation.
Direction for Use
Use Full Strength at Room Temperature or heated up to 140 oF Maximum (Do Not Add Water). In an immersion tank with or without ultrasonic cavitation, spray under immersion, or wipe applications. Soak parts until ink residues are removed. Wipe with a damp cloth or rinse off with heated water. Do Not soak Urethane Rollers in the Cleaning tank. Natural Rubber Rollers, Ceramic and Anilox Rollers can be safely soaked.
Can also be applied by hand using GO GREEN™ Saturated Wipes.
Packaging
1 Gallon EasyPour Jugs / 5 Gallon Pails / 55 Gallon Steel Drums (closed cap)
GO GREEN™ Wipes in an “Easy Carry Bucket” (90 12 ” x 12″ ) Polypropylene Saturated Wipes
Environmental Compliance Letter (read more)
|Download Tech Data Sheet |Request SDS |
| Download Ink Blaster FG Fact Sheet |
|Reclamation Data (vacuum distillation) | Request Chemical Resistance on Various Plastics and Metals